Investigating the cooling of solar photovoltaic modules under the conditions of Riyadh

Abstract

Cooling enhances the energy conversion efficiency and output of photovoltaic (PV) panels. In this work, the effects of natural convection, forced convection, and evaporative cooling on the performance of polycrystalline PV panels were investigated. The output and efficiency of a cooled PV panel were monitored and compared to those of an uncooled PV panel under the same conditions. The cooling was conducted using an insulated channel installed below a PV panel. Natural convection cooling was investigated for various channel air gaps (H = 30, 60, 90, and 120 mm). Natural convection currents in the cooling channels were capable of cooling the panel with wide air gaps. In forced convection cooling, the air was introduced by fans installed at the bottom opening of the cooling channel with various air velocities (ua = 1, 2, and 3 m/s). Evaporative natural convection cooling was performed by a wetted fabric along the lower surface of the cooling channel, whereas evaporative forced convection cooling by pushing air along the wetted lower surface of the channel. The experimental data showed that the panel efficiency and output increased due to cooling. The experimental results of natural convection cooling revealed that the use of an air gap of 120 mm to cool the solar panel contributed to an increase in the panel daily energy production and efficiency by 1.7% and 1.2%, respectively. For forced convection cooling, using air at a speed of 3 m/s increased the daily energy production by 4.4% and the efficiency by 4%. Natural convection evaporative cooling increased the daily energy production and the efficiency by 3.6% and 2.7%, respectively. Forced convection evaporative cooling contributed, at a speed of 2 m/s, to an increase in the daily energy production by 3.8% and an increase in efficiency of 3.8%.