Investigating the Acid Erosion Characteristics of Carbonate Rocks under Hydrodynamic Action.

Abstract

In carbonate areas, the unique dissolution features bring a lot of resistance to engineering constructions. The acidic filtrate will definitely cause accelerated dissolution of the surrounding rocks, and the mechanism of accelerated dissolution of such rocks in acid is not clear. In order to explore the dissolution pattern of carbonate rocks after the alteration of their primary environments, a self-made rotating reaction device was used to conduct laboratory dissolution experiments on carbonate cores under three conditions. The mass loss, the change of pH, the molar concentration of Ca2+ and Mg2+, and the morphological changes before and after acid erosion were obtained. The results of correlation analysis show that the dissolution characteristics of carbonate are significantly related to dissolution time, composition of rocks, liquid flow rate, and acid concentration. Segmented characteristics were recorded between CaO/MgO and the reaction sequence (m). When 2 < CaO/MgO < 30, the increase of CaO/MgO has a significant contribution to the chemical dissolution rate; however, when 30 < CaO/MgO < 66, the increase of CaO/MgO does not contribute significantly to the chemical dissolution rate. The dissolution rate is positively correlated with the liquid flow rate. Also, liquid flow rate changes affect dolomite more than they do limestone. The mass loss rate (Rc) order of the rocks of the five carbonate formations was Maocaopu > Qingyan > Falang > Anshun > Dengying. Differences in dissolution induced by the acidic fluids in different formations will eventually form complex dissolution channels.