Abstract
The simplest aerodynamic model of horizontal-axis wind turbines is the blade element momentum theory, which assumes that the blades behave as airfoils, but a correct two-dimensional representation is an infinite cascade of lifting bodies. This study analyzes the conventional and impulse forms of the forces on cascades of airfoils at spacings and pitch angles typical of wind turbine applications. OpenFOAM software was used to simulate steady, incompressible flow at a Reynolds number of 6×106 through cascades of NACA 0012 airfoils. The force equations agree well (less than 1% error) with the forces determined directly from OpenFOAM for four spacing ratios. We concentrate on the “wake vorticity” term, which is ignored in blade element momentum analysis. At a pitch angle of 90°, this term balances the viscous drag when the angle of attack is zero. At zero pitch, which models the outer region of a wind turbine blade at a high tip speed ratio, the term can account for 27% of the axial thrust when the angle of attack is about 4°. The normal force equation, like the angular momentum equation for wind turbines, has no viscous term, which forces the body drag to contribute to the circulation in the wake. It is shown that the airfoil assumption is conservative in that cascade elements have higher lift-to-drag ratios than airfoils at the same angle of attack. An associated result is that separation occurs at higher angles of attack on a cascade element compared to an airfoil.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.