Abstract
In this study, a hydroxyapatite composite coating was prepared by a sol–gel technique on the micro-arc oxidation (MAO)-coated AZ31 Mg alloy to seal the micro-pores. The composite coating achieved a larger hardness value and two times thickness more than pure MAO coating. The corrosion and wear resistance of the sol–gel/MAO coating in simulated body fluid were investigated compared to MAO coating. It was found that the composite coating presented a positive corrosion potential and a lower corrosion current density than MAO coating. The sol–gel/MAO composite coating could provide more effective barrier against corrosive ions than single MAO coating for AZ31 alloy. In the wear tests, a ball-on-disk tribometer was used to study the effect of loads on the wear properties of the coatings at 37 °C. The wear resistance of sol–gel/MAO composite coatings was apparently superior to MAO coating. The wear mechanisms of abrasion and adhesion in composite coatings are investigated. Finally, two physical models for the corrosion and sliding wear mechanisms of sol–gel/MAO composite coatings are proposed, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
