Abstract
Bedload transport plays a key role in the morphodynamics of mountain rivers by regulating erosion and aggradation processes. However, it is still challenging to estimate and predict bedload transport rates with reliability because of a complex interplay between different types of sediment supply, hydrological forcing, and fluvial morphologies. In the last two decades, passive sensors recording the seismic signals generated by coarse particles impacting the riverbed have been proposed to provide a continuous indirect measure of bedload transport. Among them, geophone plates and seismometers have been demonstrated to be valid tools. Here, we present the preliminary results from the new monitoring station of Stilfserbrücke/Ponte Stelvio designed and built to monitor both water and sediment fluxes in the Solda River (Italian Alps). The station, mainly financed through two ERDF 2014-2020 projects of the Autonomous Province of Bolzano South-Tyrol, is part of the operational gauging network of the Civil Protection Agency of Bolzano (Italy). Bedload transport is indirectly monitored by sixteen geophone plates covering the downstream side of a consolidation check dam. The signal associated with the vibrations generated by particle impacts on the steel plates is recorded continuously with a sampling frequency of 5 kHz. In order to calibrate the instruments, direct bedload measurements have been carried out through an innovative bridge-like structure (BLS) consisting of an electronically controlled mobile trap. The collected samples have been sieved by hand to characterize their grain size distribution. At the end of summer 2023 we have also explored the possibility to additionally monitor the river with seismometers installed on the left bank at the monitoring station. We have analyzed the signal from the geophone plates by counting the number of times its amplitude exceeds a preselected threshold expressed in volts (i.e. the impulses, Rickenmann et al., 2014), and by computing its power (Coviello et al., 2022). The best correlation is found between impulses (threshold of 0.04 V) and the bedload transport rates of particles larger than 22 mm, with a power law regression characterized by a coefficient of determination (R2) of 0.85 and a low root mean square error (RMSE) of 3.3 kg/min against peak bedload transport rates reaching 41 kg/min. These findings pave the way towards ensuring the continuous quantification of coarse sediment transport in the Solda River, allowing for the evaluation of the impact of glacier retreat and slope instabilities associated with global warming on river dynamics. Finally, the simultaneous use of seismometers may provide a unique opportunity to test existing theoretical models on bedload-induced ground vibrations through the indirect measurements provided by the geophone plates.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have