Abstract
A second Deuterium-Tritium Experimental Campaign (DTE2) at JET is planned for 2020 in which up to 1.7∙1021 DT neutrons could be produced. They will be measured by two neutron yield monitoring systems installed at JET: firstly a fission chamber system (KN1) and secondly the activation system (KN2). These systems were absolutely calibrated in 2017 using a characterized ING-17 DT neutron generator (NG) as the calibration neutron source. The neutron yield of the NG during this calibration experiment was measured at defined positions from a number of dosimetric foil activation measurements. The neutron emission rates of the NG were derived using these measurements together with results from a detailed MCNP model of the NG and its neutron source properties, and from two calculation methodologies to account for nuclide creation and decay during irradiation and cooling times. The method of neutron emission rate determination based on activation measurements and FISPACT-II simulations is described here. The comparison of results obtained for two methods of neutron emission rate determination is also presented and discussed. The impact of the applied cross section library on the computed neutron emission rate of the NG has been investigated and presented in this paper.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
