Abstract
A copper(II) Schiff base complex, [Cu(cd4OMeSalMeen)], methyl-2-{[1-methyl-2-(4-methoxy-phenolate)mehylidynenitrilo]ethyl}amino-1-cyclopentene dithiocarboxylate copper(II), was incorporated into triacetylcellulose membrane and applied as ionophore in order to develop an anion-selective optical sensor for the analysis of nitrite by absorption spectrophotometry. At optimum pH 3.0, a linear calibration curve was observed for nitrite in the range of 0.50 to 7.00 mgL-1 with a detection limit of 0.04 mgL-1. The response time of the optode (t95%) was found to be 8–10 min, depending on the nitrite ion concentration. The proposed sensor was fully recovered in nitric acid solution (0.1 M) and had acceptable reproducibility (RSD=1.9%). The optode exhibited good selectivity toward nitrite ion according to hard-soft acid base (HSAB) principle and the formation constant was calculated. The application of the sensor for determination of nitrite content in meat products was quiet successful.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
