Intrinsic stress analysis of tungsten-lined open TSVs

Abstract

The effects of silicon etching and subsequent metallization during the fabrication of tungsten-lined open TSVs are examined using a combination of measurements and simulations. The total stress through a tungsten film deposited on a flat wafer is measured and finite element simulations are performed in order to identify the intrinsic and thermal stress components in the film. The data is then used to observe and model the stress through a TSV structure, which is etched using the DRIE process, resulting in scalloped inner sidewalls through the TSV opening. The scalloped structure is then compared to the ideal flat alternative with regard to the stress through the metal film and the TSV's electrical parameters, including resistance, capacitance, and inductance. It is found that the stress around the scallop varies significantly while the average stress through the tungsten in the flat TSV is only slightly higher than the stress observed through the scalloped structure. The resistance, capacitance, and inductance are all found to increase in the presence of scallops.