Abstract
This paper presents intrinsic load-deformation properties of different geotextiles under confined and unconfined conditions. The confined load-deformation properties were determined by a test method (the intrinsic confined test) proposed by Wu (1991) for design and specification of geotextile-reinforced soil structures. The intrinsic confined test has three distinct characteristics: (1) it is an “element” test, thus the load-deformation properties determined from the test are the intrinsic properties of the geotextile; (2) the test measures the confined stiffness and strength of geotextiles without inducing soil-geotextile interface adhesion, thereby simulates the predominant operational condition in geotextile-reinforced soil structures; and (3) the stiffness and strength obtained from the test are conservative values if soil-geotextile interface slippage does occur. A detailed procedure for the intrinsic test method is described. The described method uses only a thin rubber membrane, without soil, for confinement.Four nonwoven geotextiles and one woven geotextile were tested.Discussions of the test results are presented.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.