Abstract
Field-effect transistors (FETs) based on individual semiconducting oxide (SnO2 and ZnO) nanobelts with multiterminal electrical contacts have been fabricated and characterized. Simultaneous two-terminal and four-terminal measurements enable direct correlation of the FET characteristics with the nature of the contacts. Devices with high-resistance non-Ohmic contacts exhibit a Schottky barrier FET behavior. In contrast, low-resistance Ohmic contacts on the nanobelt lead to high-performance n-channel depletion mode FETs with well-defined linear and saturation regimes, large “on” current, and an on/off ratio as high as 107. The FET characteristics of such devices show a significant modification by a 0.2% H2 gas flow at room temperature. The excellent intrinsic characteristics of these nanobelt FETs make them ideal candidates as nanoscale biological and chemical sensors based on field-effect modulation of the channel conductance.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
