Intriguing H2S Tolerance of the PtRu Alloy for Hydrogen Oxidation Catalysis in PEMFCs: Weakened Pt-S Binding with Slower Adsorption Kinetics.

Abstract

High quality of hydrogen is the key to the long lifetime of proton-exchange membrane fuel cell (PEMFC) vehicles, while trace H2S impurities in hydrogen significantly affect their durability and fuel expense. Herein, we demonstrate a robust PtRu alloy catalyst with an intriguing H2S tolerance as the PEMFC anode, showing a stronger antipoisoning capability toward hydrogen oxidation reaction compared with the Pt/C anode. The PtRu/C-based single PEMFC shows approximately 14.3% loss of cell voltage after 3 h operation with 1 ppm of H2S in hydrogen, significantly lower than that of Pt/C-based PEMFCs (65%). By adopting PtRu/C as the anode, the H2S limit in hydrogen can be increased to 1.7 times that of the Pt/C anode, assuming that the PEMFC runs for 5000 h, which is conductive for the cost reduction of hydrogen purification. The three-electrode electrochemical test indicates that PtRu/C exhibits a slower adsorption kinetics toward S2- species with poisoning rates of 0.02782, 0.02982, and 0.03682 min-1 at temperatures of 25, 35, and 45 °C, respectively, all lower than those of Pt/C. X-ray absorption fine structure spectra indicate the weakened Pt-S binding for PtRu/C in comparison to Pt/C with a longer Pt-S bond length. Density functional theory calculation analyses reveal that adsorption energy of sulfur on the Pt surface was reduced for PtRu/C, showing 1-10% decrease at different Pt sites for (111), (110), and (100) planes, which is ascribed to the downshifted Pt d-band center caused by the ligand and strain effects due to the introduction of second metallic Ru. This work provides a valuable guide for the development of the H2S-tolerant catalysts for long-term application of PEMFCs.