Intraocular pressure before and after capsulorhexis using two viscoelastic substances and two surgical approaches in enucleated porcine eyes.

Abstract

To investigate the influence of ophthalmic viscoelastic devices (OVDs) and different surgical approaches on the intraocular pressure (IOP) before and after creation of the curvilinear circular capsulorhexis (CCC) as a measure for anterior chamber stability during this maneuver. Prospective experimental WetLab study carried out on enucleated porcine eyes. IOP was measured before and after CCC with the iCare Rebound tonometer (iCare ic200; iCare Finland Oy, Vantaa, Finland). The OVDs used were a cohesive one [Z-Hyalin, Carl Zeiss Meditec AG, Germany; hyaluronic acid (HA)] and a dispersive [Z-Celcoat, Carl Zeiss Meditec AG, Germany; hydroxy propylmethylcellulosis (HPMC)]. The CCC was created using Utrata forceps or 23 g microforceps in different combinations with the OVDs. Using the Utrata forceps the IOP dropped from 63.65±6.44 to 11.25±3.63 mm Hg during the CCC. The use of different OVDs made no difference. Using the 23 g microforceps the IOP dropped from 65.35±8.15 to 36.55±6.09 mm Hg. The difference between IOP drop using either Utrata forceps or 23 g microforceps was highly significant regardless of the OVD used. Using the sideport for the creation of the capsulorhexis leads to a lesser drop in IOP during this maneuver compared to the main incision in enucleated porcine eyes. The use of different OVD has no significant influence on IOP drop.