Interpolation and Extrapolation Method to Analyze Irradiation-Induced Dimensional Change Data of Graphite for Design of Core Components in Very High Temperature Reactor (VHTR)

Abstract

Graphite materials are used as core components in the High-Temperature Gas-Cooled Reactor (HTGR) and Very High Temperature Reactor (VHTR). The authors prepared technical documents for design, material, products, in-service inspection and maintenance of the graphite components for the HTGR/VHTR, which were summarized as a draft of standard for the graphite components through discussion made in a “Special committee on research on preparation for codes for graphite components in HTGR” set up within AESJ. The draft of standard contains graphical expressions for the irradiated material properties of IG-110 graphite. It is possible to use the graphical expressions for the components design of VHTR. The graphs were obtained based on the interpolation and extrapolation of the irradiation data. The irradiation-induced dimensional change of IG-110 graphite was obtained through the interpolation and extrapolation of the irradiation data with a quadratic equation of fast neutron fluence. The irradiation data for H-451 and ATR-2E graphites were used for the evaluation of the interpolation and extrapolation of irradiation data for IG-110. It was shown in this study that the proposed interpolation and extrapolation method is reasonable for IG-110 with regard to the database available at present.