Abstract
This study presents a monitoring system to provide real-time measurement data of hydroponic that is accessible from anywhere through internet. Temperatures of nutrient solution and ambient air are of concern in the monitoring system. The system is developed through the following steps: design, implementation, and experimental test. The system is built by applying a NodeMCU ESP-12 as the microcontroller and two temperature sensors DS18B20 The NodeMCU ESP-12 is to collect measurement data of both temperature sensors and send the data to a cloud server through a WiFi internet communication. The Google Sheets is applied as the cloud server to store the measurement data and provide the data to users. Using the Google Sheets, the data is presented in a table as in the Microsoft Excel which is very convenience for processing and analyzing the data. Experimental test results show that the system is able to provide real-time and reliable data of the hydroponics temperatures that can be accessed from anywhere through the internet. The monitoring system has a delay about 3 to 6 seconds in presenting the measurement data. This delay is quite small compare to the temperature change period and therefore is negligible. Moreover, the monitoring system is built at cost USD 6.0 which is quite cheap.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IOP Conference Series: Earth and Environmental Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.