Internal structure and fragmentation kinetics of silica granules

Abstract

To improve the mechanical properties of tires, silica granules can be incorporated into the elastomer as well as carbon black. Ideally, the fragmentation of the granules in the elastomer must be obtained with low mechanical stresses and lead to very small fragments distributed homogeneously in the material. On the other hand, granules must present a sufficient cohesion, in order to avoid the generation of fine particles during handling operations. Thus it appears necessary to control the mechanical strength of granules and the mechanism of their fragmentation. In this experimental study, we investigated the fragmentation of silica granules of 250 microns produced by spray drying. For this, we characterized by granulometry the evolution of the Particle Size Distribution of silica powder in water. The granules were suspended in water and submitted to ultrasounds. This treatment is used to create the fragmentation that occurs by viscous shearing in industrial rubber processing. A core-shell structure, characteristic of granules obtained by atomization process, was observed by SEM. Furthermore, by varying the intensity of mechanical stress, the multi-scale structure of granules was evidenced as well as the existence of different regimes of fragmentation. The kinetics of fragmentation was experimentally followed on two grades of silica that showed significant differences in their behavior during the fragmentation process.