Abstract
Elastic and anelastic properties of TiN/a-Si 3N 4 and (Ti 1− x Al x )N/a-Si 3N 4 superhard nanocomposite (nc) films prepared by plasma-induced chemical vapor deposition (PCVD), magnetron sputtering and vacuum arc deposition (physical vapor deposition, PVD) have been investigated by mechanical spectroscopy. One internal friction peak with relaxational nature was observed at temperatures around 230–280 °C and frequencies about 100 Hz for as-deposited films prepared by PVD, while no peak was detected in the films prepared by PCVD whose hardness was as high as 50 GPa. A comparison of a series of samples indicates that the peak is higher for films with lower hardness. The activation energy and the pre-exponential factor of the relaxation time are deduced as 0.7–1.0 eV and 10 −10 to 10 −12 s, respectively. The intensity of this peak decreases with increasing annealing temperature. After annealing at 600–750 °C, this peak disappears and Young's modulus increases, in agreement with the increase in the hardness upon the annealing reported earlier. This internal friction peak is suggested to be associated with a thermally activated relaxation process within the interfaces that were not fully developed during the PVD process.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
