Abstract

BackgroundDemand-driven biogas production could play an important role for future sustainable energy supply. However, feeding a biogas reactor according to energy demand may lead to organic overloading and, thus, to process failures. To minimize this risk, digesters need to be actively steered towards containing more robust microbial communities. This study focuses on acetogenesis and methanogenesis as crucial process steps for avoiding acidification. We fed lab-scale anaerobic digesters with volatile fatty acids under various feeding regimes and disturbances. The resulting microbial communities were analyzed on DNA and RNA level by terminal restriction fragment length polymorphism of the mcrA gene, 16S rRNA gene amplicon sequencing, and a [2-13C]-acetate assay. A modified Anaerobic Digestion Model 1 (ADM1) that distinguishes between the acetoclastic methanogens Methanosaeta and Methanosarcina was developed and fitted using experimental abiotic and biotic process parameters.ResultsDiscontinuous feeding led to more functional resilience than continuous feeding, without loss in process efficiency. This was attributed to a different microbial community composition. Methanosaeta dominated the continuously fed reactors, while its competitor Methanosarcina was washed out. With discontinuous feeding, however, the fluctuating acetic acid concentrations provided niches to grow and co-exist for both organisms as shown by transcription analysis of the mcrA gene. Our model confirmed the higher functional resilience due to the higher abundance of Methanosarcina based on its higher substrate uptake rate and higher resistance to low pH values. Finally, we applied our model to maize silage as a more complex and practically relevant substrate and showed that our model is likely transferable to the complete AD process.ConclusionsThe composition of the microbial community determined the AD functional resilience against organic overloading in our experiments. In particular, communities with higher share of Methanosarcina showed higher process stability. The share of these microorganisms can be purposefully increased by discontinuous feeding. A model was developed that enables derivation of the necessary feeding regime for a more robust community with higher share of Methanosarcina.

Highlights

  • Demand-driven biogas production could play an important role for future sustainable energy supply

  • Discontinuous feeding increased functional resilience without loss in efficiency volatile fatty acids (VFAs) concentrations in biogas reactors are a critical indicator for process performance

  • The average VFA concentrations in both the continuously (Rconti) and discontinuously (Rdisco) fed reactors in all experiments were below 0.36 g chemical oxygen demand (COD) per liter towards the end of the training phase

Read more

Summary

Introduction

Demand-driven biogas production could play an important role for future sustainable energy supply. Feeding a biogas reactor according to energy demand may lead to organic overloading and, to process failures To minimize this risk, digesters need to be actively steered towards containing more robust microbial communities. Expensive biogas storage modules, biogas needs to be produced flexibly by changing the organic loading rate of anaerobic digesters [3] This can result in accidental organic overloading, i.e., organic loads that exceed the capacity of acetogenesis and methanogenesis, leading to accumulation of volatile fatty acids (VFAs) and potentially to process failure [4, 5]. Microbial resources management requires ways to manipulate the composition of the microbial community These can be the addition of certain beneficial microorganisms (bioaugmentation) [13] and/or the application of selection pressure, i.e., choosing specific process parameters, to favor their growth. A temporal feeding schedule is interesting because it could be implemented in industrial practice without additional investments [25]

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call