Intermetallic Getters Reactants for Vacuum Applications

Abstract

The present work continues a series of publications devoted to the study of the sorption properties of reactive alloys based on IIA metals and the development of advanced getter materials for gas and vacuum technologies. This publication attempts to answer the current challenges in the field of gas sorption associated with the emergence of new vacuum products such as vacuum insulated glasses, electronic systems, cryogenic devices, etc. An analysis of the problems that arise here, as well as the results of sorption measurements, carried out with the participation of intermetallic phases of the composition CaLi2 and Ca0.33Li0.48Mg0.19, show that the best getter support for these new hermetically sealed products can be provided by intermetallic compounds formed in systems Li-IIA metals. Intermetallic phases of this family are easy to manufacture and demonstrate outstanding service characteristics: their specific sorption capacity is recorded high, exceeding traditional gas sorbents in this respect by at least an order of magnitude; the kinetics of gas capturing is set at the stage of alloy production, i.e., is adjustable; the temporary resistance of these phases to atmospheric gases allows to install the getter at its workplace in air, without further thermal activation. The sorption superiority of reactive intermetallics is explained by their special sorption mechanism: the gas/metal interaction is formed here as a combination of two processes, continuous growth of reaction products on a metallic surface and corrosion decay of brittle intermetallic phase under mechanical forces, which feeds the chemical reaction with a fresh surface. The advantages of sorption processes of this new type are undoubted and significant: compared with the conventional sorbents, an intermetallic getter reactant solves two important problems; it reduces production costs and increases the sorption yield.