Abstract
AbstractThermoplastic veil interlayers offer a promising approach to improve interlaminar reinforcement in composite materials. This study investigates co‐polyamide (Co‐PA) interleaved veils, fabricated through the hot melt adhesive (HMA) technique. These veils are then applied with varying areal weight densities as interleaves to simultaneously toughen and strengthen carbon fiber/epoxy (CF/EP) composites, utilizing the vacuum‐assisted resin infusion (VARI) method. Integrating Co‐PA veils with a low melting point in the interlaminar of CF/EP composites improves compatibility and promotes strong adhesion between thermoplastics and epoxy resins. As result, The Co‐PA laminates exhibited significant improvements compared with the untoughened composites, with a maximum enhancement of 148.1% and 67.8% for Mode‐I (GIC) and Mode‐II (GIIC), respectively. Moreover, ILSS, tensile strength, and flexural strength improvements were also 20.9%, 34.9%, and 14.5%, respectively. The fracture surface analysis via scanning electron microscopy directly revealed the crack propagation on the fracture surfaces of Mode‐I and Mode‐II specimens. This analysis revealed that Co‐PA demonstrated excellent compatibility with epoxy resin, melts during the stage of epoxy curing, and undergoes phase separation in the later stage, resulting in the formation of “bead‐like” structures within the fibrous network. Remarkably, this structure significantly enhanced the toughness of the CF/EP composites. The Co‐PA veils can improve the interlaminar toughness of CF/EP composites due to their compatibility with the epoxy matrix and high inherent toughness and strength. This method is straightforward to manage and can be utilized for manufacturing large‐scale composite materials incorporating CF fabrics, demonstrating promise for industrial applications.Highlights With its low melting point, co‐polyamide helps prevent structural failure or excessive damage and is proposed to be utilized in composites to enhance the interlaminar fracture toughness properties. The effects of Co‐PA veils of different areal densities on the mechanical characteristics of interlaminar composites were examined. Co‐polyamide particles with fiber‐carbon laminates offer superior fatigue properties and an optimum carbon fiber‐bridging mechanism. Co‐polyamide veils with CF/EP laminates are feasible for structural use in high‐tech automotive applications.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
