Abstract
An approximate elasticity solution for prediction of the displacement, stress and strain fields within the m-layer, symmetric and balanced angle-ply composite laminate of finite-width and subjected to uniform axial extension was developed earlier [4]. In the present paper, the authors have extended that solution to treat thermal stresses and deformations induced by a uniform change in laminate temperature. The results have revealed not only the complex fields within the laminate, but also inter-relationships between the lamina axial and shearing coefficients of thermal expansion and the effective laminate coefficients of thermal expansion. Further, the solution is shown to recover laminated plate theory predictions for thermally induced fields at interior regions of the laminate, thereby confirming the boundary layer nature of the interlaminar phenomena for the thermoelastic case. Finally, the results exhibit the anticipated response in congruence with the mechanical solution of Ref. [4] and the thermoelastic results satisfy the conditions of self-equilibration necessary for the finite-width laminate subjected to free thermal deformation. Integration of the stress σ x over the laminate cross-section in the y– z plane is shown to converge to zero as the number of Fourier terms is increased. While the exact solution for mechanical loading is known to exhibit singular behavior, non-convergence of the interlaminar shearing strain is also seen to occur at the intersection of the free edge and planes between lamina of + θ and − θ orientation under thermal loading. The analytical results show excellent agreement with the finite-element predictions for the same boundary-value problem.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.