Interlaced CNT Electrodes for Bacterial Fouling Reduction of Microfiltration Membranes.

Abstract

Interlaced carbon nanotube electrodes (ICE) were prepared by vacuum filtering a well-dispersed carbon nanotube-Nafion solution through a laser-cut acrylic stencil onto a commercial polyvinylidene fluoride (PVDF) microfiltration (MF) membrane. Dead-end filtration was carried out using 107 and 108 CFU mL-1 Pseudomonas fluorescens to study the effects of the electrochemically active ICE on bacterial density and morphology, as well as to evaluate the bacterial fouling trend and backwash (BW) efficacy, respectively. Finally, a simplified COMSOL model of the ICE electric field was used to help elucidate the antifouling mechanism in solution. At 2 V DC and AC (total cell potential), the average bacterial log removal of the ICE-PVDF increased by ∼1 log compared to the control PVDF (3.5-4 log). Bacterial surface density was affected by the presence and polarity of DC electric potential, being 87-90% lower on the ICE cathode and 59-93% lower on the ICE anode than that on the PVDF after filtration, and BW further reduced the density on the cathode significantly. The optimal operating conditions (2 V AC) reduced the fouling rate by 75% versus the control and achieved up to 96% fouling resistance recovery (FRR) during BW at 8 V AC using 155 mM NaCl. The antifouling performance should mainly be due to electrokinetic effects, and the electric field simulation by COMSOL model suggested electrophoresis and dielectrophoresis as likely mechanisms.