Interfacial tension in polymer melts. I: An improved pendant drop apparatus

Abstract

AbstractAn apparatus is described to measure interfacial tension for molten polymer pairs. The apparatus is based on the pendant drop method. A CCD color video camera captures the image of a pendant drop profile, which is analyzed on‐line using a microcomputer. These almost continuous measurements permit the detection of possible changes in the behavior of the melt that might affect the interfacial tension through thermal degradation. A special syringe to inject the pendant drop has been designed in order to avoid problems such as the capillary effect of the tube of the syringe and the necking and detachment of the pendant drop. The accuracy of the apparatus was verified using water/n‐hexane and water/n‐octane. Experimental results for polypropylene/polystyrene (PP/PS) are presented. The interfacial tension between the polymer pair decreases as temperature increases and as molecular weight decreases. Interfacial tension is estimated from the drop shape when the drop is at mechanical equilibrium. For polymer systems, mechanical equilibrium normally takes from 1 to 10 h to occur. However, transient values of interfacial tension (apparent interfacial tension values obtained before mechanical equilibrium is reached) may be used to estimate the interfacial tension at equilibrium by extrapolation, thus reducing the required experimental time.