Abstract
Ni-7wt.%V is commonly used as the barrier layer material in the under-bump metallurgy in the microelectronic industry. Although interfacial reactions between various solders with the nickel substrate have been investigated intensively, the effects of vanadium addition upon the solder/(Ni,V) interfacial reactions have not been studied. Sn/(Ni,V) and Sn-Ag/(Ni,V) interfacial reactions at 250°C were investigated in this study using the reaction couple technique. The vanadium contents of the (Ni,V) substrates examined in this study are 3 wt.%, 5 wt.%, 7 wt.%, and 12 wt.% and the reaction time is 12 h. The results indicate that when the vanadium contents in the (Ni,V) substrate are 5 wt.% and higher, the Sn/(Ni,V) and Sn-Ag/(Ni,V) interfacial reactions are different from those in the solder/Ni couples. Besides the Ni3Sn4 phase as commonly formed in the reaction with Ni substrate, a new ternary T phase has been found, and the reaction path is L/Ni3Sn4/T/(Ni,V). A 250°C Sn-Ni-V isothermal section is proposed based on the three constituent binary systems and limited experimental results obtained in this study. The reaction path is illustrated with the proposed Sn-Ni-V isothermal section. No stable ternary Sn-Ni-V phase is found from the phase equilibria study, and the new T phase is likely a metastable phase.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.