Abstract
For tungsten fiber-reinforced tungsten matrix (Wf/W) composites, the interface between W matrix and W fiber has a dominant effect on the mechanical properties. In this study, the interfacial microstructure in the Wf/W composites with or without Y2O3 coating deposited on W fiber is investigated. The crystal structure of the Y2O3 coating composed of nano-sized columnar grains on the W fibers is cubic. And the crystal structure of Y2O3 coating changes to be face centered cubic after sintering in the Wf/W composites. Two kinds of interfaces, including the interface between W matrix and Y2O3 coating, the interface between W fiber and Y2O3 coating, are present in the Wf/W composites. Different orientation relationships are observed in these two kinds of interface. The stable orientation relationship with 111Y2O3 // 01¯1W have the lowest interfacial energy. The Y2O3 interface is essential for improving the toughening behavior of Wf/W composites and impeding the abnormal grain growth on the surface of W fiber sintering at low temperature. The recrystallization nucleus is developed by the bonding between W powder and W fiber during sintering, and then grow fast into W fiber. The apparent activation energy of abnormal grain growth of W fibers is about 242.7 KJ/mol sintering at temperature between 1500 and 1800 °C. The abnormal large grains usually show intergranular brittle fracture and make the W fiber be brittle.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have