Interfacial Interactions Between Crude Oil and CO2 Under Reservoir Conditions

Abstract

In this paper, an experimental technique was developed to study the interfacial interactions between crude oil and CO2 under reservoir conditions. By using the axisymmetric drop shape analysis (ADSA) for the pendant drop case, this new technique makes it possible to measure the interfacial tensions (IFTs) between crude oil and solvents, such as CO2, at high pressures and elevated temperatures. The major component of this experimental setup is a see-through windowed high-pressure cell. In this study, the IFT of the crude-oil–CO2 system was measured as a function of pressure at two fixed temperatures. It was found that, due to mutual interfacial interactions between crude oil and CO2, their dynamic IFT gradually reduces to a constant value, i.e., the equilibrium IFT. The major interfacial interactions observed in this study include light-ends extraction and initial turbulent mixing. At T = 58°C, the equilibrium IFT reaches 1–2 dyne/cm when P ≥ 13.362 MPa, and only partial miscibility is achieved even up to P = 28.310 MPa. Thus, this experimental study shows that only partial miscibility can be obtained in most CO2 flooding reservoirs. In addition, it is expected that the observed light-ends extraction and initial turbulent mixing phenomena may have significant effects on ultimate oil recovery and long-term CO2 sequestration.