Abstract
We present results examining the interfacial fracture toughness of Cu2O/epoxy-resin interfaces, which is an important parameter in microelectronic packaging design. Tensiometer measurements of the epoxy-resin surface energy together with contact angle measurements of epoxy-resin/Cu2O wetting yield an estimate of the thermodynamic work of adhesion of 0.074 Jm−2. Double cleavage drilled compression (DCDC) and pull test samples were used to evaluate the critical stress intensity and strain energy release rate for interface fracture and found to be 0.05 MPa-m1/2 and 1.4 Jm−2. These sample geometries yielded only interface failure with no trace of fracture occurring in either the copper or the epoxy-resin component. The difference between the values of the thermodynamic work of adhesion and the critical strain energy release rate is attributed to plastic processes most likely occurring in the copper layer of the sandwich sample configuration of the DCDC sample.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
