Abstract
Polyacrylonitrile (PAN)-based carbon fibres were surface treated by ozone modification method and air-oxidation treatment. The interfacial properties of carbon fibre reinforced polyamide 6 (CF/PA6) composites were investigated by means of the single fibre pull-out tests. The surface characteristics of carbon fibres were characterized by X-ray photoelectron spectroscopy (XPS). As a result, it was found that interfacial shear strength values of the composites with ozone-treated carbon fibre are greatly increased. XPS results show that ozone treatment increases the amount of carboxyl groups on the carbon fibre surface, thus the interfacial adhesion between carbon fibre and PA6 matrix is effectively promoted. The effect of surface treatment of carbon fibres on the tribological properties of CF/PA6 composites was comparatively investigated. Experimental results revealed that surface treatment can effectively improve the interfacial adhesion between carbon fibre and PA6 matrix. Thus the wear resistance was significantly improved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
