Abstract
Effects of volatile extractives in pine wood (PW) particles are investigated upon interfacial adhesion, nucleation behavior and mechanical properties in polypropylene (PP) matrix. Various concentrations of the PW are filled in PP, i.e. PP/PW [90/10 (PP10), 75/25 (PP25) and 50/50 wt% (PP50)]. As the concentration of the PW particles is increased, the crystalline peak temperature is increased, the melting peak temperature is decreased, the elongation strain is decreased and the amount of volatile extractives in the PW is increased. Few spherulites are locally developed at the interface between the PW and the PP. The PW acts as a nucleating agent; however, it does not help reinforcing of the PP/PW compounds. The volatile extractives in the PW particles seems to evaporate- and migrate-out during the processing and then coats the pine wood surface, trapped in the compound, and migrats out to the wall surface. This results in a poor interfacial adhesion between the PW and the PP.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.