Abstract
The analog resistive switching properties of amorphous InGaZnOx (a-IGZO)-based devices with Al as the top and bottom electrodes and an Al-Ox interface layer inserted on the bottom electrode are presented here. The influence of the electrode deposition rate on the surface roughness was established and proposed as the cause of the observed unusual anomalous switching effects. The DC electrical characterization of the optimized Al/a-IGZO/AlOx/Al devices revealed an analog resistive switching with a satisfactory value for retention levels, but the endurance was found to decrease after 200 cycles. The predominant conduction mechanism in these devices was found to be thermionic emission. An in-depth analysis was performed to explore the relaxation kinetics of the device and it was found that the current has a lower decay rate. The current level stability was tested and found reliable even after 5 h. The cost-effective and precious metal-free nature of the a-IGZO memristor investigated in this study makes it a highly desirable candidate for neuromorphic computing applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
