Abstract
To enhance the performance of inverted structure polymer solar cells (PSCs), interfacial engineering considered as an effective and straightforward method was employed. In this study, to overcome the surface traps and energy level mismatches of the electron transport layer, a means of interface passivation by evaporating an ultrathin CaF2 layer above ZnO thin film as the electron transport layer was successfully adopted. We display that CaF2 layer could passivate the surface traps of ZnO thin film and decrease the interfacial barrier between PC61BM and ZnO, so that electron transfer efficiency is facilitated, the recombination of electrons and holes is inhibited at the contact interface, and the series resistance is reduced. After the introduction of the CaF2 layer, the short-circuit current and the fill factor was greatly improved, also the power conversion efficiency (PCE) was increased from 3.21% of the reference device without the CaF2 layer to 4.22% in the inverted PSCs based on P3HT:PC61BM bulk heterojunction photoactive layer. These results could have special guiding significance for high-efficiency PSCs and also great potential for applications of photovoltaic devices in the future.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have