Abstract
AC4C cast Al alloy and zinc-coated steel are successfully lap jointed using friction stir welding. The interface microstructure is investigated using optical microscopy, scanning electron microscopy and X-ray diffraction. The mechanical properties of the joints are evaluated using tensile test. Experimental results show that the lap joint consisted of four part structures, i.e. stir zone structure of Al alloy, new intermetallic compounds layer, old intermetallic compounds layer of original zinc coat and base material of steel. The thickness of intermetallic compounds layer increases with decreasing welding speeds and has a significant effect on the strengths of the joints. Heavy thickness of intermetallic compounds layer seriously deteriorates the mechanical properties of the joints. The intermetallic compounds layer mainly contains Fe 2Al 5 and Fe 4Al 13.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.