Interface engineering of La0.6Sr0.4Co0.2Fe0.8O3−δ/Gd0.1Ce0.9O1.95 heterostructure oxygen electrode for solid oxide electrolysis cells with enhanced CO2 electrolysis performance

Abstract

For CO2 electrolysis in solid oxide electrolysis cells (SOECs), oxygen evolution reaction in the oxygen electrode limits the electrolysis process due to its slower reaction kinetics. Composite oxygen electrodes with good uniformity and interfacial connectivity are expected to promote the charge carriers' transport effectively and thus increase the electrocatalytic performance of the cell. In this work, interface engineering is applied to promote the conventional La0.6Sr0.4Co0.2Fe0.8O3−δ-Gd0.1Ce0.9O1.95 (LSCF-GDC) composite oxygen electrode to form a heterostructure via co-synthesis method. The results prove that LSCF co-synthesized with 40 wt%GDC (LSCF/40GDC) exhibits higher conductivity and faster oxygen exchange kinetics and bulk diffusion processes. The nickel/yttria stabilized zirconia (Ni-YSZ) supported cell with LSCF/40GDC oxygen electrode could approach an impressive CO2 electrolysis current density of 2.6 A·cm−2 at 1.6 V and 800 °C. Meanwhile the cell can operate at 1.5 V and 750 °C with electrolysis current density of 1.3 A·cm−2 for more than 100 h without apparent degradation. This heterostructure enhances the interfacial bonding strength between LSCF and GDC phases, thereby providing a continuous network structure for electron and ion transport. Such an interface engineering via co-synthesis method offers a straightforward and convenient modification for oxygen electrodes, providing an alternative route for advanced materials development of CO2 electrolysis.