Interface dynamics in dewatering processes of high-water-content slurry flocculated with PAC

Abstract

This study addresses the challenge of the reverse effect observed in the dewatering process of waste slurry as poly-aluminum chloride (PAC) dosages increase. It investigates the flocculation mechanism of PAC at varying dosages in a high-water-content slurry using molecular dynamics simulation methods. The results indicate that PAC molecules primarily adsorb montmorillonite particles while exerting negligible influence on quartz. Dewatering efficiency is influenced by the adsorption-repulsion interaction at the PAC-montmorillonite interface. Efficiency increases with PAC dosage up to an optimum level due to enhanced adsorption but decreases thereafter due to increasing repulsion. Within this optimal range, montmorillonite interfaces exhibit a higher negative charge, facilitating stable PAC adsorption and leading to increased aggregation of montmorillonite particles, thereby forming flocs. The adsorption capacity of PAC on montmorillonite particles escalates with dosage until achieving the optimal flocculation effect. However, surpassing this optimal dosage prompts repulsion among outer PAC molecules, gradually causing montmorillonite particles to separate due to repulsion, thereby weakening the flocculation effect. This research provides theoretical support for the flocculation and dewatering of PAC in high-water-content waste slurry, emphasizing the rational and cost-effective addition of PAC in practical applications.