Interesterification of sesame oil and a fully hydrogenated fat using an immobilized lipase catalyst in both batch and continuous‐flow processes

Abstract

AbstractLipase‐mediated interesterification of sesame oil and a fully hydrogenated soybean oil was studied at 70 °C in both a batch reactor (BR) and a continuous‐flow packed‐bed reactor (PBR) using four different initial weight ratios of substrates (90 : 10, 80 : 20, 70 : 30 and 60 : 40) with Lipozyme TL IM (Thermomyces lanuginosa) as the biocatalyst. Reaction rates were determined by following the dependence of the profile of the product triacylglycerols (TAG) on the reaction time (BR) or the space time (PBR) via RP‐HPLC‐ELSD. Product TAG identities were confirmed by HPLC‐APCI‐MS. Primary differences between the performances of the two reactors were the maximum level of net hydrolysis (ca. 3 and 10 wt‐% lower acylglycerols at equilibrium for the PBR and BR, respectively), the time or space time required to approach quasi‐equilibrium conditions, and less migration of acyl groups in the PBR trials. For the BR trials, quasi‐equilibrium conditions were approached in 4–6 h, while for the PBR trials short space times (15 min to 2 h) were sufficient to produce effluent compositions similar to equilibrium BR compositions. The predominant TAG families formed by interesterification were LLS, PSO, PSL, SSL, and SSO (L = linoleic; S = stearic; P = palmitic; O = oleic). Oxidative stabilities, melting profiles and solid fat contents were determined for selected reaction products.