Abstract
AbstractThe formation of TiSi2 from deposited Ti layers on Si and the subsequent transformation of TiSi 2 from the C49 to the C54 phase have long been of concern, particular for the silicide formation on heavily doped, narrow polycrystalline Si lines. In this work, phase formation during rapid thermal annealing of Ti/Mo bilayers sequentially deposited on blanket Si wafers and on narrow polycrystalline Si lines (0.6 μm width) is studied. The Mo layer is always 0.5 nm thick, and the Ti either 45 nm or 60 nm. It is shown that the initial physical separation of Ti from Si by the interposed Mo layer leads to complete prevention of the formation of the C49 phase. Instead, a Mo-bearing silicide phase of hexagonal structure forms first, and the C54 phase nucleates and then grows on top of it via Si diffusion through the growing silicide layers. The significance of this finding is that the usual sequence for the formation of TiSi2,. e. the C49 phase forms as a result of the Ti-Si interaction and the C54 phase forms as the product of phase transformation, is altered by the interposition of a thin refractory metal layer, here Mo. The difficulties involved in nucleation and growth of the C54 phase are then overcome, yet by a different approach than the usually employed ones which rely on ion implantation to enhance the formation of the C49 phase and the subsequent transformation to the C54 phase.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.