Interconnectivity and permeability of supercritical fluid-foamed scaffolds and the effect of their structural properties on cell distribution

Abstract

This study aims to investigate interconnectivity and permeability of scCO2-foamed scaffolds and the influence of structural scaffold properties on cell distribution. Supercritical fluid technology was utilized to fabricated scaffolds from 37 kDa, 53 kDa and 109 kDa PLGA (85:15). Pore size, pore size distribution and porosity were quantified by MicroCT, and window sizes were measured using SEM. A novel interconnectivity algorithm allowed the quantification of scaffold interconnectivity in three space dimensions. To determine the permeability of porous materials direct perfusion experiments were performed, where a known flow rate was applied to measure the pressure differential across the scaffolds. The permeability was calculated using Darcy's law. Largest pore sizes, porosities, interconnectivities and permeabilities were obtained for scaffolds fabricated from 37 kDa PLGA. These scaffolds showed a heterogeneous pore structure and distribution, whereas homogeneous pore structure, smallest pore sizes, porosities, interconnectivities and permeabilities were observed for scaffolds fabricated from 109 kDa PLGA. The distribution of 3T3 fibroblasts through scCO2-foamed scaffolds was investigated by MicroCT and MTT staining. Cells were further visualized by fluorescent imaging. Uniform cell distribution was observed on scaffolds fabricated from 109 kDa PLGA and an average of 10% of the total scaffold volume was covered with cells that had adhered onto them.