Abstract

Abstract. This study compares different methods to retrieve the specific surface area (SSA) of snow from satellite radiance measurements in mountainous terrain. It aims at addressing the effect on the retrieval of topographic corrections of reflectance, namely slope and aspect of terrain, multiple reflections on neighbouring slopes and accounting (or not) for the anisotropy of snow reflectance. Using MODerate resolution Imaging Spectrometer (MODIS) data for six different clear sky scenes spanning a wide range of snow conditions during the winter season 2008–2009 over a domain of 46 × 50 km in the French Alps, we compared SSA retrievals with and without topographic correction, with a spherical or non-spherical snow reflectance model and, in spherical case, with or without anisotropy corrections. The retrieved SSA values were compared to field measurements and to the results of the detailed snowpack model Crocus, fed by driving data from the SAFRAN meteorological analysis. It was found that the difference in terms of surface SSA between retrieved values and SAFRAN-Crocus output was minimal when the topographic correction was taken into account, when using a retrieval method assuming disconnected spherical snow grains. In this case, the root mean square deviation was 9.4 m2 kg−1 and the mean difference was 0.1 m2 kg−1, based on 3170 pairs of observation and simulated values. The added-value of the anisotropy correction was not significant in our case, which may be explained by the presence of mixed pixels and surface roughness. MODIS retrieved data show SSA variations with elevation and aspect which are physically consistent and in good agreement with SAFRAN-Crocus outputs. The variability of the MODIS retrieved SSA within the topographic classes of the model was found to be relatively small (3.9 m2 kg−1). This indicates that semi-distributed snowpack simulations in mountainous terrain with a sufficiently large number of classes provides a representation of the snowpack variability consistent with the scale of MODIS 500 m pixels.

Highlights

  • Snow on the ground is both a resource and a hazard in mountain regions

  • Studies reporting on the retrieval of snow properties from satellite data often refer to the optical radius (Fily et al, 1999; Painter et al, 2009; Negi and Kokhanovsky, 2011b), while some others tend to refer to specific surface area (SSA) (Dumont et al, 2012)

  • We assessed the effect of accounting for (1) the local topography and multiple reflections, (2) the anisotropy of snow and ice reflection, (3) the shape of snow grains, in snow grain size retrievals from MODerate resolution Imaging Spectrometer (MODIS) data in mountainous areas

Read more

Summary

Introduction

Snow on the ground is both a resource and a hazard in mountain regions. As a temporary reservoir of water that is Published by Copernicus Publications on behalf of the European Geosciences Union.A. During the melt season, knowing the amount of snow available for melting and the melt rate are key factors to assess the melt water flux into rivers and aquifers. These variables depend on the amount of snow accumulated, and on the time evolution of the surface energy balance of the snowpack and its internal physical properties. All of these variables vary greatly in space and time in mountain areas due to complex interactions between meteorological conditions (in particular, wind and precipitation), surface snow conditions and topography

Objectives
Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call