Interaction of anti‐wear additive TCP with advanced bearing steels

Abstract

AbstractThe quest for high‐performance energy efficient aircraft turbine engines has led to the development of a number of high‐performance rolling element bearing materials and engine lubricants with the aim of providing superior mechanical component durability. The heat treatments/surface treatments used to achieve the desired physical and mechanical properties for these newer alloys can result in altered surface chemistry from currently used materials. Surface chemistry plays an important role during lubricant‐bearing material interactions and the formation of beneficial tribological films during component operation. The objective of this study was to analyse the tribo‐films formed on bearing surfaces and investigate the interaction of lubricant additives, specifically the phosphorus‐based anti‐wear additive tricresyl phosphate (TCP), with different bearing materials under relevant bearing operating conditions. Bearing tests were conducted on 208‐size (40 mm bore) angular contact bearings at 127°C and 154°C using gas turbine engine lubricants conforming to MIL‐PRF‐23699G at maximum Hertzian contact stresses of 3.1 GPa and 3.55 GPa. Bearing materials evaluated included AISI M50, M50NiL, nitrided M50NiL (N) and three variants of Pyrowear 675 with silicon nitride rolling elements. Tribo‐films were analysed using Energy dispersive X‐ray spectroscopy and Auger Electron spectroscopy. Results indicate that phosphorus‐rich anti‐wear tribo‐films form on all of the bearing materials studied. The applied thrust load and heat treatment had a significant effect on tribo‐film thickness. The study also suggests that current gas turbine engine lubricants formulated with TCP should form beneficial tribo‐films that enhance bearing fatigue life and performance.