Intensification of the rate of heat and mass transfer at the wall of a stirred tank reactor by integrating a helical coil turbulence promoter with the tank wall

Abstract

ABSTRACT The influence of a helical coil turbulence promoter on liquid-solid mass transfer rates in a stirred tank was investigated using a technique that involved measuring the rate of diffusion-controlled copper dissolution in acidified dichromate. The study examined the effects of helical coil tube diameter (d), helical coil pitch (p), impeller rotation speed, impeller geometry (axial and radial), the presence of baffles, and solution physical properties. The presence of the helical coil near the reactor wall significantly enhanced mass transfer rates, with a factor ranging from 1.01 to 2.48. This improvement was accompanied by a corresponding increase in the volumetric mass transfer coefficient (kA), ranging from 2.68 to 4.55, depending on operating conditions. Further analysis revealed that the average mass transfer coefficient increased with decreasing coil tube diameter, while coil pitch had a minimal impact. Additionally, radial flow turbines demonstrated superior mass transfer performance compared to axial flow turbines. The presence of baffles also promoted higher mass transfer rates compared to unbaffled reactors. The experimental data were successfully correlated using dimensionless correlations, emphasizing the significance of these correlations in scaleup and design optimization of catalytic stirred tank reactors with efficient cooling systems.