Intensification of heterogeneously catalyzed Suzuki-Miyaura cross-coupling reaction using ultrasound: Understanding effect of operating parameters

Abstract

Palladium-catalyzed Suzuki-Miyaura cross-coupling reaction is a significant reaction for obtaining industrially important products. The current research work deals with intensification of reaction of 4-bromoanisole and phenylboronic acid catalyzed with 5wt% Pd/C (5% by weight Pd supported on C available as commercial catalyst) using ultrasound and more importantly, without use of any additional phase transfer catalyst. Heterogeneous catalyst has been selected in the present work so as to harness the benefits of easy separation and the possible limitations of heterogeneous operation are minimized by introducing ultrasonic irradiations. The effect of operating parameters such as ultrasound power, temperature, catalyst loading and molar ratio on the progress of reaction has been investigated. It has been observed that an optimum power, temperature and catalyst loading exist for maximum benefits whereas higher molar ratio was found to be favourable for the progress of the reaction. Also, the use of ultrasound reduced the reaction time from 70min required in conventional approach to only 35min under conditions of frequency of 22kHz, power dissipation of 40W and catalyst loading as 1.5mol% (refers to total quantum of catalyst used in the work) in ethanol-water system under ambient conditions. The work also demonstrated successful results at ten times higher volume as compared to the normally used volumes in the case of simple ultrasonic horn. Overall, the work has successfully demonstrated process intensification benefits obtained due to the use of ultrasound for heterogeneously catalyzed Suzuki-Miyaura cross-coupling reaction.