Abstract
Simulation studies, such as finite element (FE) modeling, provide insight into knee joint mechanics without patient involvement. Generic FE models mimic the biomechanical behavior of the tissue, but overlook variations in geometry, loading, and material properties of a population. Conversely, subject-specific models include these factors, resulting in enhanced predictive precision, but are laborious and time intensive. The present study aimed to enhance subject-specific knee joint FE modeling by incorporating a semi-automated segmentation algorithm using a 3D Swin UNETR for an initial segmentation of the femur and tibia, followed by a statistical shape model (SSM) adjustment to improve surface roughness and continuity. For comparison, a manual FE model was developed through manual segmentation (i.e., the de-facto standard approach). Both FE models were subjected to gait loading and the predicted mechanical response was compared. The semi-automated segmentation achieved a Dice similarity coefficient (DSC) of over 98% for both the femur and tibia. Hausdorff distance (mm) between the semi-automated and manual segmentation was 1.4 mm. The mechanical results (max principal stress and strain, fluid pressure, fibril strain, and contact area) showed no significant differences between the manual and semi-automated FE models, indicating the effectiveness of the proposed semi-automated segmentation in creating accurate knee joint FE models. We have made our semi-automated models publicly accessible to support and facilitate biomechanical modeling and medical image segmentation efforts (https://data.mendeley.com/datasets/k5hdc9cz7w/1).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.