Abstract
ABSTRACT This article investigates the interest of using in-situ piezoelectric (PZT and PVDF) disks to perform real-time Structural Health Monitoring (SHM) of glass fiber-reinforced polymer composites submitted to various tensile loadings. The goal is to evaluate the working range and SHM potential of such embedded transducers for relatively simple mechanical loadings, with the long-term aim of using them to monitor complete 3D structures submitted to more complex loadings. SHM is performed acquiring the electrical capacitance variation of the embedded transducers. To study the potential links between the in-situ capacitance signal and the global response of the loaded host specimens, a multi-instrumentation composed of external Nondestructive Testing techniques was implemented on the surfaces of the specimens to search for multi-physical couplings between these external measurements and the capacitance curves. Results confirmed the non-intrusiveness of the embedded transducers, and allowed estimating their working domain. PZT capacitance signal follows well the mechanical loadings, but the piezoceramic transducer gets damaged after a determined relatively low strain level due to its brittleness. The limits of this working domain are extended by using a stretchable PolyVinylidene Fluoride (PVDF) polymer transducer, allowing this one to perform in-situ and real-time SHM of its host tensile specimens until failure.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
