Abstract
Several scientific instruments suppliers are offering complete networking and automation packages for analytical laboratories. Nevertheless there is still considerable work to be done in the area of standardization of file formats generated by different data acquisition systems supplied by scientific instruments manufacturers. Recent work on the netCDF transfer protocol for mass spectrometry data suggests that good progress is being made in the area of data formats. Our laboratory operates a number of diverse instruments, including two high resolution systems (ZAB 2F, 70 SEQ) and one quadrupole (QMD 1000) from Fisons Instruments, one ion trap system from Finnigan (ITS 40) and one pyrolysis mass spectrometer from Horizon Instruments (RAPyD-400), all equipped with autosamplers. This instruments are physically located in two distinct laboratories. The data systems are based on very different computers, including a DEC PDP-11/24, a VAX 4000/90 and several PCs. The large amount of data produced by the MS laboratory and the implementation of GLPs, (Good Laboratory Practices) and GALPs (Good Automated Laboratory Practices) prompted us to examine the possibility of networking the instrumentation in a client/server computing environment. All instrument data systems have been connected to the institute network via ethernet, using either DECnet or TCP/IP. A VAXCluster consisting in a VAXStation 4000/90 host and a VAXStation 3100 satellite has been configured as a server using DEC PATHWORKS V.4.1 server software. This allows for file, disk, application and print services to all the PC clients connected network wide. Unattended distributed backup and restore services for PC hard disks are implemented. Mass spectrometry data files are permanently archived in their original format on 4 Gbyte tape cartridges and stored for later retrieval. Files can be transferred to any office PC running the appropriate mass spectrometry software. A centralized spectra and structure information management system based on the MassLib (Chemical Concepts) software allows for library searches using the SISCOM algorithm after specific file conversion programs or using JCAMP-DX files. Furthermore, the mass spectrometer data systems are readied for their eventual incorporation into a LIMS.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Laboratory Automation & Information Management
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.