Integrating insulated concrete form (ICF) with solar-driven reverse osmosis desalination for building integrated energy storage in cold climates

Abstract

This research addresses the pressing global challenges of clean energy and water supplies, emphasizing the need for sustainable solutions for the building sector. The study integrates Reverse Osmosis (RO) systems with building energy systems, incorporating Solar Thermal Collectors (STC)/Photovoltaic Thermal (PVT), water-to-water heat pumps, and an Insulated Concrete Form (ICF) based building foundation wall thermal energy storage. It explores the effectiveness of four configurations—STC-ICF, STC-ICF-RO, PVT-ICF, and PVT-ICF-RO—using sensitivity analysis on collector area (25 % and 50 % increase) and weather data from four Canadian cities: Winnipeg, Toronto, Halifax, and Vancouver and two non-Canadian cities: Helsinki, Finland and Bergen, Norway. Key outcomes highlight the benefits of integrated RO scenarios, such as reduced ICF wall temperature, diminished unwanted heat in the cooling season, reduced RO pump consumption, and enhanced solar energy production. The STC-ICF-RO and PVT-ICF-RO systems achieved energy savings of 653 kWh and 131 kWh, respectively, compared to their non-integrated RO counterparts. Both systems also contributed to lowering CO2 production levels. The STC-ICF-RO system's payback period is 2 years, affirming its economic viability. Compared to the base system without ICF and RO integration, the STC-ICF-RO and PVT-ICF-RO configurations reduced energy consumption by 20 % and 32 %, respectively. The sensitivity analysis suggests potential system improvements under specific conditions, primarily when implemented in communities of buildings.