Abstract

Considering the radio-based indoor positioning system pertaining to signal degradation due to the environmental factors, and rising popularity of IP (Internet Protocol) cameras in cities, a novel fusion of inertial measurement units (IMUs) with external IP cameras to determine the positions of moving users in indoor environments is presented. This approach uses a fine-tuned Faster R-CNN (Region Convolutional Neural Network) to detect users in images captured by cameras, and acquires visual measurements including ranges and angles of users with respect to the cameras based on the proposed monocular vision relatively measuring (MVRM) method. The results are determined by integrating the positions predicted by each user’s inertial measurement unit (IMU) and visual measurements using an EKF (Extended Kalman Filter). The results experimentally show that the ranging accuracy is affected by both the detected bounding box’s by Faster R-CNN height errors and diverse measuring distances, however, the heading accuracy is solely interfered with bounding box’s horizontal biases. The indoor obstacles including stationary obstacles and a pedestrian in our tests more significantly decrease the accuracy of ranging than that of heading, and the effect of a pedestrian on the heading errors is greater than stationary obstacles on that. We implemented a positioning test for a single user and an external camera in five indoor scenarios to evaluate the performance. The robust fused IMU/MVRM solution significantly decreases the positioning errors and shows better performance in dense multipath scenarios compared with the pure MVRM solution and ultra-wideband (UWB) solution.

Highlights

  • Indoor positioning technologies [1,2,3] are necessary and technical prerequisites for various industrial and consumer applications in location-based services

  • To further evaluate the positioning ability of the proposed integrated inertial measurement units (IMUs)/monocular vision relatively measuring (MVRM) approach, a test for a single user and an external camera is implemented in obstacles environment

  • The visual measurements including ranges and angles are obtained by the proposed MVRM method with the assistant of a finetuned Faster R-convolutional neural network (CNN) which is used to detect and locate the target in images captured by the cameras

Read more

Summary

Introduction

Indoor positioning technologies [1,2,3] are necessary and technical prerequisites for various industrial and consumer applications in location-based services. As GNSS (Global Navigation Satellite System) signal is not continually available in indoor environments and the presence of unavoidable issues in complex indoor areas, such as multipath and non-line of sight, the high precision and reliable indoor positioning is not easy to be achieved in realistic conditions. Based on these constraints, developing a low cost, reliable, and infrastructure-free or infrastructure-less positioning solution for consumers remains an open challenge at present. The representative solutions determining locations in indoor environments comprise Wi-Fi [8], Sensors 2018, 18, 3134; doi:10.3390/s18093134 www.mdpi.com/journal/sensors

Methods
Results
Conclusion

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.