Abstract

This study presents a comprehensive investigation of the Paleocene coal in the Tirah area, District Khyber, Khyber Pakhtunkhwa, Pakistan, utilizing onsite Electrical Resistivity Tomography (ERT) and Ground Penetrating Radar (GPR) experiments combined with geochemical analyses of obtained coal-rock samples. ERT and GPR profiles, along with geochemical data, were collected and meticulously analyzed to assess the potential and quality of coal seams based on coal ranking, aiming to delineate their spatial distribution and future exploitation prospects. The study reveals a wide range of resistivity values, spanning from 8.93 Ωm to 2472 Ωm. The uppermost layer, comprising silt and clay with water saturation, exhibits resistivity values ranging from 8.93 Ωm to 50 Ωm. The subsequent stratum, characterized by wet sandstone with minor shale and clay, has resistivity values between 50 Ωm and 95.3 Ωm. Significantly, the zone with resistivity values between 95.3 Ωm and 800 Ωm is identified as the probable host of the coal seams. Based on the results, the coal seams are estimated to exist at depths ranging from 14 to 23 m, with resistivity values between 95.3 Ωm and 800 Ωm. GPR results further corroborate these findings, revealing coal-bearing strata at various depths, thus confirming the ERT results. Additionally, proximate and ultimate analysis provided insights into the quality of the coal, with average concentration values of moisture content (6.95%), ash content (22.12%), volatile matter (28.55%), fixed carbon (42.40%), carbon content (55.35%), hydrogen (4.7%), nitrogen (0.95%), sulfur (4.82%), and oxygen (10.06%). Comparative analyses of the obtained results with local coals from the Salt Range in Punjab, Pakistan, and coal from Ogboyaga, Nigeria, confirm that the studied coal ranks as sub-bituminous. This comprehensive assessment offers valuable insights into the potential and quality of Paleocene coal in the studied region and is applicable to other areas with similar geological settings.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.