Abstract
Micro-grid which connects with the main grid can operate under the grid-connected mode or the islands mode. During the switching process between the two operation modes, if the control strategy is not complete, there will be problems such as the AC bus voltage oscillation and current surge, which will result in the switchover failure. An improved energy storage inverter control method based on operation states tracking is adopted for the optical storage micro-grid using master–slave control, which solves the problem of control variables mutation. Secondly, an improved software phase-locked method based on grid phase state tracking is proposed in an energy storage inverter. The problem of instantaneous mutation of the phase angle is solved by cooperating with the micro-grid operation state control signal during operation mode changes. Through the improvement of the two control strategies above, the transient shock phenomena of the micro-grid voltage and current during the switching process is obviously improved, and the harmonic content of the AC voltage and current is obviously reduced. Finally, a detailed model of optical storage micro-grid is established in MATLAB/Simulink, and the correctness and practicability of the improved control strategy are verified by simulation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
