Abstract
Electro-optic (EO) modulators based on polymer-embedded silicon racetrack resonators (EOM-PSRR) are investigated. To obtain the single-mode propagation condition, the mode and transmission characteristics of the polymer-embedded silicon waveguide are simulated by the finite element method (FEM). By adding a static bias voltage, the EO modulation performances of EOM-PSRR embedded with lithium niobate (LiNbO3), EO polymer (AJ309), and hybrid EO polymer/TiO2 material (HEOT) are studied. The results show that the EOM-PSRR embedded with LiNbO3 achieves a high modulation depth (MD) of ∼27.6dB with a low EO wavelength tuning (λEO) of 10 pm/V. However, the EOM-PSRR embedded with HEOT has a high λEO of 100 pm/V but a low MD of ∼6.2dB with an extinction ratio of ∼5.2dB. The EOM-PSRR has potential application prospects in optical communication, optical signal processing, and optical network links. It can be produced as an optical frequency comb generator in a dense wavelength division multiplexing system, an EO frequency shifter for laser beams, an optical soliton former, and a photon time-delay device in a phased array radar.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.