Instrumentation System for Ground Vibration Analysis During Sheet Pile Driving

Abstract

Abstract To enable the study of the sheet pile-soil interaction during driving, it was essential to have a record of the sheet pile vibrations as well as the vibrations at depth in the surrounding soil. In this paper, an instrumentation system for vibration analysis during vibratory sheet pile driving was presented. The instrumentation system was used in a full-scale field test where vibrations were measured on the sheet pile as well as at depth in the ground. The new instrumentation system and the field test were thoroughly described. As a sheet pile was driven into the ground, vibrations were transferred both at the toe and along the shaft. Whether it was the toe or the shaft that created the largest contribution to vibrations in the ground is debated in literature. Results from the field test were presented in order to investigate the effect of the position of the sheet pile toe on the ground vibrations at depth. It was shown that, within a distance of about 1.6 m from the driven sheet pile, the ground vibrations at depth were affected by the passing of the sheet pile toe. The current field test also indicated that the toe contributed to more ground vibrations than the shaft.