Abstract
Performance measurement of agricultural machinery is essential for enhancing their efficiency for which they are operated. The performance related data helps the operator to select optimum operating parameters which reduce fuel consumption and increase field productivity. This study was aimed to develop various sensing units and install them on the tractor for evaluating performance of a tractor drawn rotavator. A microcontroller based embedded system was developed for continuous recording of wheel slip, actual forward speed, throttle opening, engine speed, velocity ratio, draft and power take-off (PTO) torque related data while carrying out tillage operation with rotavator. The wheel slip (from 1.5% to 35%) and actual forward speed of the tractor (up to 6 km h-1) was measured using inductive proximity sensors. For measuring throttle opening (0 to 100%), engine speed (750 to 2500 rpm), draft (65 to 350 kg) and PTO torque (up to 420 N-m) values, a potentiometer, magnetic pickup sensor, S-type loadcell and PTO torque transducer, respectively, were used. For computing velocity ratio, peripheral speed of rotavator was measured using PTO speed data received from PTO torque transducer, and actual forward speed of tractor was measured using inductive proximity sensor. The developed sensing units were calibrated under both dynamic and static conditions, and were also verified in laboratory and field conditions. Results showed that output signals received from the sensing units varied linearly with applied load. The mean absolute percentage error (MAPE) between measured and actual values was found to be below 5%. From the measured parameters, specific energy requirement and total power required for carrying out tillage operation could be computed. The power requirement was found to increase with increase in both gear and throttle settings. The specific energy requirement was minimum when rotavator was operated in L2 gear of the tractor. The minimum specific energy of 21 Wh m-3 was found at L2 gear and 75% throttle opening.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
